WONDERDUCK
REPLACEMENT

• 4 ORANGE FEET: - Approximately 1 in. wide & 4 inches long
• 2 Foot Attachments:  Are adjustable and can be used on either side of decoy.  Each Black attachment has 4 set screw holes, that allows Nylon set screw to adjust feet inward or outward from body of decoy.
• 2 Metal Set Screws - (Phillips screwdriver needed  to set). 
• 4 Nylon Screws, 4 Nylon Wing Nuts & 4 Nylon Slip Washers.

• To prevent rusting : Remove both metal set screws and place small drop of oil, remove both foot attachments to store at end of duck season. 
• To prevent damage to motors:  As you tighten metal set screw, to offset downward pressure of screwdriver, place finger under foot attachment and slightly push upward.  This will  help prevent damaging motor gears or knocking motor shaft out of alignment.        
• DO NOT  use METAL replacement screws nuts or washers..  They may be to heavy, unbalanced and can place an undue strain on motors, that could result in motor failure. If need replacement nylon parts they can be purchased through Wonderduck on line